HYDX-5A

The hydraulic core drill rig could move itself with crawler. The mast is lifted and lowered with oil cylinder and is foldable. It is easy for transportation and located with ground supports. LANTYTO® Machine was established in the 1960s, which engages in processing, manufacturing and selling an extensive range of core drill equipments. Except with abundant experience in hydraulic core drill rig, it offers practical and effective advices on core drilling rigs for customers.

Parameters of Hydraulic Core Drill Equipment

Model		HYDX-5AHydraulic Core Drill Rig
Diesel Engine	Model	Cummins 6CTA8.3-C195
	Power	145kW
	Speed	2200rpm
Basic parameter of drilling capacity	BQ	1500m
	NQ	1300m
	HQ	1000m
	PQ	680m
Rotator Capacity of Hydraulic Core Drill Rig	RPM	Two Shifts/Stepless 0-1145rpm
	Max. Torque	4650N.m
	Hold Diameter	121 mm
	Max. Lifting Capacity of spindle	150kN
	Max. Feeding Power	75kN
Capacity of Main Hoist	Hoisting Power (single wire)	77kN
	Steel Wire diameter	18 mm
	Steel Wire Length	60 m
Capacity of Steel Wire Hoist	Hoisting Power (single wire)	12Kn (bare drum)
	Steel Wire diameter	6 mm
	Steel Wire Length	1500 m
Mast of Hydraulic Core Drill Rig	Mast Height	11 m
	Mast Adjusting Angle	0 to 90°
	Drilling Angle	45 to 90°
	Feeding Stroke	3800 mm
	Slippage Stroke	1100 mm
Other	Weight	12500 kg
	Dimensions(L × W × H)	5600 × 2240 × 2650 mm
	Transport Way	Crawler
Mud Pump Model		BW-250
Clamping Scope		55.5 to117.5 mm

Features

1. The triple hydraulic series pump, the main vale and the motor are all selected and equipped with famous international brand products.
2. The rotation of the spindle is driven by dual-motor closed loop circuit with high operation efficiency and big torque.
3. The rotator is fed and driven with a system connecting the spindle and oil cylinder with chain. The system has the function, if the piston rod of oil cylinder moving is certain distance, the spindle moving would double the distance.
4. The hydraulic core drill rig could move itself with crawler. The mast is lifted and lowered with oil cylinder and is foldable. It is easy for transportation and located with ground supports.
5. A load sensitive control is applied for the hydraulic system of drill equipment. It is equipped with a top operating platform and an operating platform with a hole for the drilling spindle.
6. The drilling rigs are also equipped with centering guide in its upper part and guide in its lower part. A hydraulic clamp is adopted at the position of drilling hole.
7. There are three types of overall structure: self-propelled crawler, tyre and platform.